GREENGLOVE

Premium Partner

GREENGLOVE

GreenGlove Limited, in partnership with MetaFLO Technologies, are providing environmentally friendly super absorbent polymers for the treatment of liquid waste. Conventional methods for treating liquid waste are poor. Adding vast amounts of sawdust, fly ash from coal generation or lime dust to a liquid until it meets solids criteria for transportation to landfill is wasteful and redundant. MetaFLO uses environmentally safe chemical reagents that solidify liquid waste without significant increase in volume. Take a glass of water to represent liquid waste. Add sawdust until it adsorbs all the water. You will now have 3 or 4 cups of material to throw away. Logic would tell you there has to be a better way. The impetus behind the formation of MetaFLO was driven by the conviction that there was a better way and that it wasn’t beyond our capability to achieve. MetaFLO has developed a process that solidifies liquid industrial waste streams in a matter of minutes, watch the videos below. The process includes a patented, high volume mixing unit that facilitates the addition of a powdered formulation of absorbent materials to meet environmental solids criteria and stabilize metals and hydrocarbons. The process can be applied as a mobile waste processing unit or in-situ for high volume continuous batch waste streams. MetaFLO has multiple patented delivery systems to make the application of the reagent to the waste stream quick and cost effective. Each machine has different properties and is designed for different situations.

Product / Services

METAFLO REAGENT MF002

DOWNLOAD PDF ⇓

MetaFLO-MF002-Tech-sheet2

This reagent is designed to work in conjunction with a MetaFLO LMS mixing unit and is used for the solidification and stabilization of drill fluids. MF002 is designed for use on drill fluid or similar waste that fails the Paint Filter Test (PFT) and the Toxicity Characteristic Leaching Procedure TCLP for Heavy Metals.

Can reduce weight and volume by as much as 20%
Immediately converts drill fluids to a solid
Creates a dry, stackable solid for easy handling
Can help waste pass Toxicity Characteristic Leaching Procedure (EPA Method 1311)
Help waste pass paint filter criteria
Minimal humidity effects
Landfill friendly
LMS or mixing equipment
Clay Component

METAFLO REAGENT MF006

DOWNLOAD PDF ⇓

MF006_Spec_sheet_Sept_2017

MF006 is a proprietary solidification reagent used with non-pumpable materials and is ideal with MetaFLO’s mixing delivery system or bucket mixing. It has been proven very effective in the solidification of drill cuttings, drilling mud, hydrovac mud and industrial sludge with higher suspended solids.

Can reduce weight and volume by as much as 20%
Immediately converts drill fluids to a solid
Creates a dry, stackable solid for easy handling
Can help waste pass Toxicity Characteristic Leaching Procedure (EPA Method 1311)
Help waste pass paint filter criteria
Minimal humidity effects
Landfill friendly
Mixing equipment or manual mix
Perfect for smaller batches

METAFLO REAGENT MF008

DOWNLOAD PDF ⇓

MF008_Spec_sheet_Sept_2017

The MF008 reagent, engineered to work in conjunction with MetaFLO’s mixing unit, is ideal for solidifying oil based drill cuttings. MF008 is non-hazardous, non-toxic, chemically inert and consists of naturally occurring minerals. The typical dosages for MF008 is less than 3% w/w and it has been proven to be a superior product to traditional bulking agents such as sawdust.

METAFLO’S LIQUID MIXING SYSTEM LMS 3

DOWNLOAD PDF ⇓

MetaFLO-LMS-3-Spec-Sheet

The MetaFLO LMS 3 is most commonly used by Environmental Services or Directional Drilling organizations. Its compact design allows it to be moved to the jobsite in a pickup truck, small trailer, or flatbed truck. Operating the LMS 3 on site reduces material handling costs, reduces site traffic improves safety and ensures the generator stays in compliance. This technology will create a stackable solid and give the operator the ability to provide accurate total liquid waste generated information from the site.

Capacity of 20 m3 of liquid waste per hour 5400 – 6000 gallons (90 to 100 gal/min)
Equipped with Nano-Shear technology for thorough, homogeneous mixture
Ideally suited for HDD applications, oil & gas drilling and mine tailings
For HDD applications, mobile units may be accompanied by simple solids removal bins, removing the requirement for vacuum truck assistance
Compact design allows it to be moved in a pickup truck or small flatbed truck to the jobsite
Power options include gas, diesel or electric or hydraulic

METAFLO’S LIQUID MIXING SYSTEM LMS 6

DOWNLOAD PDF ⇓

MetaFLO-LMS-6-Spec-Sheet

The MetaFLO LMS 6 is used by generators of extremely large volumes of liquid waste. It is most commonly used by environmental services or directional drilling organizations. Despite its extremely high throughput capacity, the MetaFLO LMS 6 is still compact enough to be moved to the jobsite on a small trailer or flatbed truck. Operating the LMS 6 on site reduces material handling costs, reduces site traffic, improves safety and ensures the generator stays in compliance with waste regulations. This technology creates a stackable solid and gives the operator the ability to provide accurate total liquid waste generated information from the site.

Capacity of 180 m3 of liquid waste per hour 45,000 – 50,000 gallons (> 800 gal/min)
Equipped with Nano-Shear technology for thorough, homogeneous mixture
Ideally suited for large sump cleanouts, large bore HDD applications, oil & gas drilling and mine tailings
For HDD applications, mobile units may be accompanied by simple solids removal bins, removing the requirement for vacuum truck assistance
Compact design allows it to be moved on a small flatbed truck to the jobsite

Greenglove